Affiliate disclosure: This page contains an Awin affiliate link. Buzzing Solutions may earn a commission from a qualifying purchase, at no added cost to you. We have not installed or independently tested these toilets.
Simple Project, listed in Awin under Shenzhen Cangyu Technology Co., Ltd., sells bathroom products including SNFLEX two-piece and one-piece macerating toilets. The brand positions these systems for spaces such as basements or bathrooms where conventional gravity-drain routing is difficult. A macerating toilet is not automatically suitable for every property: installation design, code compliance, pump head, discharge routing and service access matter more than headline wattage alone.
Check current Simple Project models and specifications
Published model differences
| Configuration | Brand-published positioning | Verify before purchase |
|---|---|---|
| SNFLEX two-piece macerating toilet | Separate toilet and pump; profile describes a 600W pump and additional inlets for selected bathroom fixtures | Permitted connected fixtures, inlet height, total flow, venting and maintenance clearance |
| SNFLEX one-piece macerating toilet | Integrated appearance intended for smaller bathrooms, with the pump positioned behind the toilet | Actual dimensions, rear clearance, pump access and replacement procedure |
Installation questions that decide suitability
- Does the local plumbing code permit the proposed pumped-waste layout?
- What vertical lift and horizontal run will the pump need to overcome?
- What discharge-pipe diameter, slope, check valve and isolation valves are required?
- How will the system be vented under the manufacturer’s instructions and local code?
- Is a grounded, protected electrical circuit available in the required location?
- Can the pump be accessed without removing finished walls or permanent cabinetry?
- Which fixtures may connect to the auxiliary inlets, and what temperature limits apply?
- Who provides parts, warranty service and technical support in your region?
Who it may suit
Potential use cases include a basement half-bath, conversion space or renovation where a qualified installer confirms that a pumped solution is appropriate. It may be unsuitable when gravity drainage is readily available, the discharge route exceeds specifications, local approval is uncertain, or future maintenance access cannot be preserved.
Do not rely on marketing copy alone
Before ordering, obtain the current installation manual and dimensional drawing. Ask a licensed local plumber or the relevant authority about permits, backflow protection, venting, electrical requirements and allowable discharge routing. Product compatibility is property-specific.
Review current Simple Project documentation and models
Programme facts checked in Awin
- Advertiser ID: 99013; publisher ID: 2700584
- Region: United States; mobile optimised: yes
- Cookie: 30 days; auto-validation: 50 days
- Product feed: 23 products, last-updated date shown in Awin as May 15, 2026
- Awin directory metrics observed August 16, 2026: 6.69% conversion, 100% approval, USD 3.32 EPC and average payment time about 49–50 days.
Related guides
Updated August 16, 2026. Specifications, inventory, policies and programme terms may change; confirm them before purchase.
Macerating toilet: 60-second installation feasibility check
Short answer: do not choose by pump power or fixture style alone. The exact discharge run, vertical lift, venting, inlet configuration, electrical supply, local code and service access must work together.
- Sketch the proposed toilet, sink/shower inlets, discharge route and vertical/horizontal run.
- Compare every dimension and published limit with the exact model manual.
- Confirm venting, backflow protection, outlet/GFCI requirements and service clearance.
- Check local plumbing/electrical permit requirements before purchase or site work.
- Plan access for maintenance and review warranty/return exclusions for installed equipment.
Potentially a good fit: the documented installation falls inside the exact model’s limits and local approval is clear. Potentially a poor fit: the route or code requirements are being assumed.
Explore other independent home-product guides in the Awin partner buying-guide hub.