Argendon Dehumidifier Comparison

Compare the model, drainage and price before choosing a crawl-space dehumidifier.

  • Five models, side by side.
  • Dated prices and source-linked specifications.
  • Clear limits: no model is right for every space.

We may earn a commission if you buy through these links, at no extra cost to you. This is an independent review of published information, not hands-on testing.

Check Shield 35P price and details

Compare all five models below

Product buttons open the merchant’s site. Argendon handles ordering, delivery and support.

Argendon product-range promotional illustration
Argendon-supplied collection illustration via Awin. Models pictured are illustrative, not all five models compared below. Printed capacity ranges use headline ratings; verify the exact model and warranty terms. This is not our installation or test.

Measure the space

Record area, temperature, humidity and access openings.

Plan the drain

Confirm a practical gravity or pump route before buying.

Read the terms

Check the exact model’s manual, returns and warranty.

Compare the essentials

USD price snapshot: October 28, 2026. Confirm current prices, selected items, taxes, shipping and valid promotions at checkout.

Published capacity at the same 80°F / 60% RH condition where verified; not a room-sizing recommendation.
Model Published capacity Price snapshot Merchant page
Shield 35P 35 pints/day
Specification sheet
$372.89 View Shield 35P
Sandidry 55C 55 pints/day
Specification sheet
$478.40 View Sandidry 55C
Shield 60P 60 pints/day
Manufacturer: 80°F / 60% RH
$594.15 View Shield 60P
Guardian 60P 60 pints/day
Manufacturer: 80°F / 60% RH
$717.40 View Guardian 60P
Shield 85P 85 pints/day
Specification sheet
$639.20 View Shield 85P

Shield 60P

Listed price
$594.15
80°F / 60% RH
60 pints/day

Manufacturer listing: 80°F / 60% RH; not independently tested.

View Shield 60P

Guardian 60P

Listed price
$717.40
80°F / 60% RH
60 pints/day

Manufacturer listing: 80°F / 60% RH; not independently tested.

View Guardian 60P

Check access, power and operating temperature

Manufacturer product-page specifications checked October 29, 2026. Dimensions are outside L × W × H in inches; not installation clearances.
Model / source Outside dimensions Listed power Operating range
Shield 35P 15.2 × 11.2 × 11.4 115 V / 60 Hz; 2.9 A 33–105°F
Sandidry 55C 17.64 × 11.69 × 11.85 115 V / 60 Hz; 3.51 A 33–105°F
Shield 60P 21.3 × 14.1 × 11.7 115 V / 60 Hz; 4.12 A 35.6–102.2°F
Guardian 60P 21.3 × 14.1 × 11.7 115 V; 4.5 A 33.8–104°F
Shield 85P 21.3 × 12.8 × 14.6 115 V / 60 Hz; 5.63 A 35.6–102.2°F

All five listings describe gravity drainage and a pump. Confirm the discharge route, lift requirement and exact manual before installation. Hose length is not treated as a verified vertical lift rating. Listed operating current is not a measurement of household energy cost. Leave the manufacturer-required service and airflow clearances; dimensions alone do not establish installation suitability.

The 60-pint figures above are explicitly stated at 80°F / 60% RH on the Shield 60P and Guardian 60P product pages. Their larger 145-pint headline figures refer to saturation conditions. These are manufacturer ratings, not our test results.

Open the manual for the exact model

The Shield 60/60P/85P and Guardian 60P/85P manuals identify their covered models and state 115 V, 60 Hz single-phase supply, a grounded GFCI outlet and a 15-amp circuit protector on PDF page 5. The circuit-protector figure is not the unit’s operating current or an energy-use estimate. Follow the exact unit label and manual and have a qualified installer confirm the site’s electrical and clearance requirements. The capacity figures in the comparison remain attributed to the source-linked manufacturer product pages, not to a measurement by Buzzing.

Check the detail you need

Why headline capacity can mislead
Two ratings. One Shield 35P.
70 pints/dayManufacturer saturation rating
35 pints/dayManufacturer rating at 80°F / 60% RH

Different test conditions, not a change in model. The larger headline is not the result to expect in every home.

See the source-linked comparison above. Capacity changes with test conditions; square-foot coverage is not an assessment of your home.

Room, drainage and installation checks
  1. What is the measured humidity? Use a reliable hygrometer in more than one location and record readings at different times.
  2. Where is the moisture coming from? A dehumidifier manages airborne moisture; it does not repair plumbing leaks, groundwater entry, failed gutters, or major drainage problems.
  3. What area and air volume must be treated? Square footage is only a starting point. Ceiling height, partitions, vents, access doors, and air leakage also matter.
  4. How will water leave the unit? Compare gravity drainage with a built-in pump. Confirm lift height, hose route, freeze risk, and where discharge is allowed.
  5. Can it operate at the site’s temperature? Crawl spaces and warehouses may be cooler than living areas. Check the manual’s operating range and defrost behavior.
  6. What electrical circuit is available? Verify voltage, current draw, outlet location, grounding, and any local code requirements before installation.
  7. How will filters, coils, and drains be serviced? Leave enough clearance and plan regular inspection. A unit that cannot be reached is difficult to maintain.

A gravity drain is simple when the hose can slope continuously to an approved discharge point. A pump can help when water must travel upward or across a difficult route, but it adds components that should be inspected. In either case, avoid kinks, confirm the discharge route, and follow the product manual.

Moisture problems that equipment may not solve
  • Record relative humidity and temperature for several days.
  • Inspect for plumbing leaks, standing water, condensation, and exterior drainage problems.
  • Check whether vents, doors, or unsealed penetrations bring humid outdoor air inside.
  • Confirm the space is suitable for the unit’s published operating range.
  • Plan continuous drainage and safe electrical access.
  • Recheck humidity after installation and adjust based on the manual.

The U.S. Environmental Protection Agency generally advises keeping indoor relative humidity below 60%, ideally between 30% and 50% where practical. See the EPA’s moisture and mold guidance. A crawl space with flooding, sewage, structural damage, extensive mold, or unresolved water entry may need qualified professional assessment before equipment selection.

Warranty, maintenance and total cost

Before buying, read the current written warranty rather than relying only on a headline duration. Check covered components, labor, shipping, registration, maintenance duties, exclusions, and claim procedures. Also consider electricity use, replacement filters, drain maintenance, installation materials, and access for service.

More manufacturer information and limits

Argendon’s current publisher brief positions the line for U.S. homeowners and professionals managing moisture in basements, crawl spaces, renovation projects and some commercial or industrial environments. It highlights continuous drainage, automatic defrost for cooler conditions, ETL certification, a five-year limited warranty and product-line coverage claims reaching up to 1,800 square feet.

Important: these are advertiser-published, product-line-level claims—not independent test results and not promises that every model has every feature. Confirm the exact model page, manual, electrical listing, operating-temperature range, drainage configuration, coverage guidance and written warranty before buying.

  • Most relevant users: owners or contractors dealing with recurring humidity in a basement or crawl space, humid-climate homes, renovation work, or enclosed commercial areas.
  • Useful features to verify: continuous drain routing, pump versus gravity drain, automatic defrost behavior, accessible filter service and the specific ETL listing shown for the model.
  • Claim to treat carefully: lowering humidity can make conditions less favorable for mold and musty odors, but a dehumidifier does not remove existing mold or repair water intrusion.
  • Coverage caution: the brief’s “up to 1,800 sq. ft.” statement describes the broader product line. Use the selected model’s current listing and manual—not the brand-level maximum—to size a purchase.

Read the advertiser-supplied Argendon content brief.

Have the measurements and drain plan ready?

Compare the merchant’s current listings and written terms before ordering. A dehumidifier does not repair leaks, standing water or structural problems.

Compare current Argendon products

Product and source review: October 29, 2026. Prices remain the dated October 28 snapshot. Manufacturer-provided specifications are not our own tests; this is not engineering, electrical, installation or remediation advice.

Affiliate disclosure · Contact Buzzing Solutions